vasia
July 20th, 2004, 11:22 AM
I just got the Kenwood DV-5700 hooked up for DVD-Audio and I am trying to calibrate my Marantz SR8300 with a pair of MA Silver 8's, silver center and Hsu STF-2 sub (SFX surrounds are hopefully coming very soon). When I do tests using SPL meter and SR8300 menu, I have to set up sub pretty low. However, on Kenwood DVD-A setup actually sub turns out pretty low and need to be turned up. To have sub properly levels in both setups I had to set the dial on the sub's amp to about 50% and -12dB on SR8300 level setup (other speakers are around 0dB) and Kenwood 5.1 channel setup has all speakers at -8 to -10 db and sub at 0 db. However, when I watch movies, the sub does not seem to produce level of oomph that I guess it should with 5.1 DD.
Couple of more things, my mains are set to large and center to small and Marantz also has individual level setup for 7.1 inputs that I use for DVD-A,but I have not tried changing those.
What am I doing wrong?
Are all speakers supposed to be set to small for movies?
Also, is it better to have sub amp set to low and have high setting in the receiver (e.g. have +smth dB) or vise versa?
If the mains are set to large, would the receiver properly re-direct LFE to the sub?
Thank you!
Couple of more things, my mains are set to large and center to small and Marantz also has individual level setup for 7.1 inputs that I use for DVD-A,but I have not tried changing those.
What am I doing wrong?
Are all speakers supposed to be set to small for movies?
Also, is it better to have sub amp set to low and have high setting in the receiver (e.g. have +smth dB) or vise versa?
If the mains are set to large, would the receiver properly re-direct LFE to the sub?
Thank you!