Ventriloquist & -3R installed and working -- I think

[Retread]

My Ventriloquist and STF-3R are installed and working. At least I'm getting sound, although I doubt I've got it set up right yet. Between a new Pioneer receiver surround sound receiver, six Ventriloquist speakers, and a subwoofer with its own settings, it takes a lot of study and sorting out to get it right.

My subwoofer is to the rear and right, and I can hear it directionally, which probably means I don't have my crossover right yet. I think I'm using the crossover in the receiver and think it is set for 100 Hz.

Someone wondered whether the Ventriloquist speaker system would fill my rather large room. No problem. I have a headache from running it too loud.

[Sasha_G]

We'll, we're working on making things even easier. I hope that the new manual and quick start guide helped a little.

To reduce the directionality, you might consider:
1) lowering the crossover to 80 Hz.
2) It may be a little too loud.
3) It may shake nearby objects, windows, and walls.