upper frequency response of vtf 1

[medrberg]

I just bought a vtf 1 pairing with monitor audio radius r90 in front. These are small speakers that just go down to 85hz. I have a new denon that I am going to let do the bass management instead of sub. So I will disable sub crossover. My question/concern is that the sub's internal crossover only goes to 90hz, but my denon sets crossover by 20 at a time (I can choose 80 or 100). 80 is no good because the r90 won't go down that low. I am worried about 100 if the Hsu can't handle between 90 and 100hz. On the hsu website I only see lower frequency response but can someone confirm if it can handle up to 100hz. thanks in advance

[Pete_Hsu]

Hi medrberg,

With crossover switch set to 'Out' on the sub amplifier, the VTF-1 will have a flat frequency response out to at least 200Hz. So if you set the crossover on your receiver to 100Hz, make sure to set crossover switch to 'Out' on the subwoofer to avoid having a gap in your frequency response.

Sincerely,

[medrberg]

thanks! will set sub to out and denon crossover to 100hz. This is definitely the best sub I have ever had:)