Please help with setup using spl VTF-2

[Steve C]

I am trying to tune my system with the radio shack spl meter I just got today. (thanks santa)

What are the correction #'s for the Radio shack unit?

I have never used a spl meter before, any pointers?

My system seems to be lacking in the midbass region, Still tweaking

HT system

Sony 30Es reciever
HSU VTF-2 sub 1 week old
Paradigm Studio 20's F&R
Paradigm Studio 450 center

Thanks for your help in advance!

[Ddavidson]

quote:
Hsu Research / Boston Audio Society Bass Test Tracks

Third-octave-wide warble tones, 16-250Hz
These warble tones are at constant level, with frequency varied randomly over the space of one-third of an octave, centered on the standard ISO center frequencies. For example, the 20Hz warble tone varies between about 18 and 22.5Hz. The bandwidth is wide enough so the signals will not excite narrow room resonances too much, but narrow enough to give you a good idea of the overall bass response of your system.

The bands whose frequencies begin with 2, 5 and 1 are marked by a brief tone at the start. The sequence in hertz
(with tones marked by a t) is 16, t/20, 25, 31.5, 40, t/50, 63, 80, t/100, 125, 160, t/200, 250. [EBM]

http://hsuresearch.com/mp3/


Try burning the above MP3 test tracks and create your own test disc.
Here is the web address For 2050 meter mods: Here is the web address for the Radio Shack 2050 meter mods: http://www.gti.net/wallin/audio/rsm...50/33-2050.html


Ddavidson