New speakers...do I change my setup?

[Dave]

I just changed my front 3 speakers and the manual says to set the crossover on a subwoofer to 60hz. I currently have my VTF-2 set to "Out" and my receiver's digital bass management to 100hz (it won't go lower). The speakers are set to small. I briefly talked to a technical advisor from the company and he said I definately should use the crossover at 70 or at least 80hz regardless of the reciever's setting but I thought this would cause a "bass gap." My Denon Universal player's bass management is set at Small and 80hz. When I use this to play SACD's etc...through the Component audio jacks, it bypasses the receiver's bass management. Any suggestions?
Thanks for the help!

[Sasha_G]

Many, many receivers have crossovers that don't go any lower than 100 Hz. This means the subwoofer will be doing more of the work in reproducing bass, which is not a problem.

I think you don't have anything serious to worry about, except a bit more directionality from the subwoofer since it is playing higher notes.