Ventriloquest System Crossovers

[legend2020]

I have the Ventriloquest speakers with the VTF3-MK2 subwoofer and an Okyo TX-SR805 receiver. The Ventriloquest options is set to ON.

The Audyssy system is curretly setting the crossovers at Front R&L 150, Front Center 120 and Rears at 150, the sub is set at 80. The settings seem high for the speakers, should I manually lower them or leave them at this level?

[Pete_Hsu]

Hi legend,

I would set the crossover for the front left/right/center at 80Hz, and set the ventriloquist switch on the back of the front center to 'On'. For the rear satellites, it's ok to set those at 150Hz.

Sincerely,