HSU Research Forum (HRF)

HSU Research Forum (HRF) (http://forum.hsuresearch.com/index.php)
-   Hsu Research - Setup and Placement Recommendations (http://forum.hsuresearch.com/forumdisplay.php?f=35)
-   -   ULS-15 rear panel questions (http://forum.hsuresearch.com/showthread.php?t=95859)

suzook1 August 25th, 2014 5:03 AM

ULS-15 rear panel questions
Can someone educate me on the following settings.

ULF trim. Currently set to 16hz

Crossover out/in Currently set to out.

I have a Onkyo 5010

many thanks

shadyJ August 25th, 2014 3:05 PM

The ULF Trim boosts the deep bass output. The deeper the frequency it is set to, the more of a boost the deep bass gets. If you like to listen to movies at loud volumes, it might be a good idea to keep this higher, closer to 50 Hz.

The crossover switch will let the ULS-15 run full range if it is set to 'out'. If it is set to 'out', it is up to the AVR to filter out high frequencies. I would set it to 'out' and let the Onkyo deal with the crossover.

suzook1 August 26th, 2014 3:16 AM

thank you for the response Shadyj

All times are GMT -8. The time now is 7:54 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.