I'm struggling with the Hz setting on my Onkyo TX-SR606 and I hope someone can help me out.
I have Mirage nanosats for my front speakers with a frequency at 100 Hz-20 kHz (+/- 3db). My subwoofer is the HSU STF-2 with a volume position at 12 o'clock. I have placed the subwoofer nearfield under my end table near the wall (for WAF).
I have my speakers at the "small" setting and the automatic Audyssey settings selected the following Hz for the rest of the speakers:
FL: 120 Hz
CC: 150 Hz
FR: 120 Hz
BR: 120 Hz
BC: 120 Hz
BL: 120 Hz
My question is what setting should I have for my subwoofer? The Mirage Nanosat manual recommends setting it at 120 Hz, but I am getting some sound localization at that setting. Is it ok to set at 80 Hz for the sub and have the 20 Hz gap?
Last edited by CK01 : January 5th, 2009 at 12:28 PM.