View Single Post
  #4  
Old October 3rd, 2019, 2:15 PM
Kevin_Hsu Kevin_Hsu is offline
Administrator
 
Member Since: Jun 2012
Location: CA, USA
Posts: 366
Kevin_Hsu is on a distinguished road
Hard to say, but I've heard a few others report that as well. It's quite strange. With the y-adapter, that does double in the input voltage going to the sub so it ends up adding an additional 6 dB to the input signal. So technically, with the y-splitter, the channel level should be around -4 or -3 dB.
Reply With Quote