View Single Post
  #172  
Old July 21st, 2016, 4:36 PM
Kevin_Hsu Kevin_Hsu is offline
Administrator
 
Member Since: Jun 2012
Location: CA, USA
Posts: 332
Kevin_Hsu is on a distinguished road
It depends on what you're trying to do. If you're trying to measure the response at a particular placement, you would set up the dBSPL Meter at your listening position, around ear height. Set your meter to C weighting and measure the output at each frequency from the 1/3 octave wide warble tones from 80 Hz to 16 Hz. Most dBSPL meters are generally less sensitive when you get to the lower bass. If you have the radio shack dBSPL meter, analog, we do have compensation numbers for that meter on page 6 in the manual.
Reply With Quote