View Single Post
Old September 26th, 2014, 7:36 PM
Kevin_Hsu Kevin_Hsu is offline
Member Since: Jun 2012
Location: CA, USA
Posts: 376
Kevin_Hsu is on a distinguished road
Indroducing the VTF-15H Mk2

Dear Fellow Hsu Members,

Hsu Research is proud to introduce to you, the VTF-15H Mk2. The VTF-15H Mk2 takes the renowned VTF-15H and brings you superior performance with the tunability the VTF series are known for. The VTF-15H Mk2 features a completely redesigned high excursion driver and an upgraded 600w amplifier to give you more cleaner, tighter, more dynamic bass.


- 2000w short-term, 600w continuous amplifier with a class A/B output stage/switching power supply, featuring a custom EQ, soft clipping, subsonic filtering, phase switch, 24dB/oct low-pass adjustableLinkwitz-Riley
crossover, continuously variable Q control, high-level inputs, unbalanced inputs and balanced XLR inputs.

- Newly Redesigned 15" ultra high excursion driver, with double the magnet of the original VTF-15H, and a cast frame.

Enclosure - 24" x 18" x 26" H x W x D (add 1" to H for feet and 2" to D for heat sink and grille) featuring rounded corners with a smooth, matte, satin-black finish. Utilizes the innovative flared triangular port design with the large cross-sectional area to allow for higher output levels with less port noise.

Measurements - 16 Hz low end extension with one port open and 22 Hz with two ports open
CEA2010 (measured 1m from woofer, peak): [2 Ports Open/1 Port Open]
40-63 Hz: 128.2 dB/126.2
20-31.5 Hz: 120.2 dB/119.7

Product Pricing - Base price of $899 for satin black finish, $1049 for real wood veneer, rosenut finish

Warranty - 7 years on the driver and up to 5 years (2 years standard) on the electronics

Now Shipping!

See the link below for more information:

Last edited by Kevin_Hsu : September 19th, 2016 at 4:12 PM.
Reply With Quote