View Single Post
  #14  
Old September 19th, 2019, 8:52 AM
Kevin_Hsu Kevin_Hsu is offline
Administrator
 
Member Since: Jun 2012
Location: CA, USA
Posts: 370
Kevin_Hsu is on a distinguished road
I would just stick with Q0.7. The way I go about it is adjust the Q first, EQ switch second, then port settings third. What you can do is play the 80 Hz test tone and switch between 0 and 180. Whichever one gives you the loudest level at 80 Hz should be the one you use. Though technically, Onkyo's system should account for that anyway with the distance correction.
Reply With Quote