![]() |
#1
|
|||
|
|||
![]() Hi Everyone. I just ordered the VT-12/STF-2 package and I'm looking for some help on the best way to mount the rear satellites on my rear wall. I have an oddly shaped wall (pictures attached). It is 9.6 ft wide, with 10 ft. ceilings, but it has three segments (labeled A, B, & C) with different depths. I'm trying to decide if I should install shelves, or wall mounts. I'd like to point the left and right surrounds at each other, like the manual suggests, but that could be tough with the way my wall is laid out. I'd appreciate any thoughts or suggestions.
Thanks, Jim |
#2
|
|||
|
|||
You can use 48" speaker stands for rear left and rear right. Make sure they are pointed at each other and are above your ear level. Full 48" is good enough. Rear center can be installed on ceiling of wall section B firing down at the listening area or it can be installed on wall B (slightly bent down towards the listening area) about 3 or 4 feet above the listening level. HTH.
|
#3
|
|||
|
|||
Slightly bending speaker toward listning area
Quote:
|
#4
|
|||
|
|||
Quote:
![]() |
#5
|
|||
|
|||
Quote:
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | Rate This Thread |
|
|