HSU Research Forum (HRF)  

Go Back   HSU Research Forum (HRF) > Hsu Central > Hsu Research - Speakers and Subwoofers
Become a member Forum Help Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old July 17th, 2018, 2:28 PM
JerryMeeker's Avatar
JerryMeeker JerryMeeker is offline
Registered User
 
Member Since: Feb 2010
Posts: 131
JerryMeeker is on a distinguished road
Standby mode on ULS-15—why use it?

I have owned my four ULS-15 subs for at least five years and am still very pleased with their performance. Lately, I have noticed that one of the subs requires a stronger signal than the other three to “wake up” from standby mode. All four subs are meticulously gain-matched, so I would expect all four to wake up simultaneously. I even devised a test using REW in which I isolated each sub and sent a pink noise test signal, gradually raising the level of the signal until the sub woke up. For three of the subs, this occurred with a signal of -45dB, and the fourth sub required -43dB. Not a lot of difference, but when I am listening to music at reasonable levels, the fourth sub can remain asleep for quite a while.

So I decided to run another test to see whether leaving all four subs in an “always on” state actually used a significantly different amount of power. I have a power measuring device called a “Kill-A-Watt”, which measures the power consumption of an attached device over time. I plugged it into one of the subs and measured two 12-hour periods, one with the sub in the always-on state, and one with the sub in Sleep mode. Given the cost of electricity in my area, which is $0.08/KWh, the cost of running a ULS-15 with no load is approximately $1/mo. The cost for the sub running awake or asleep was almost exactly the same, indicating that I could easily solve my problem by simply setting the subs to “always on”, and not worry about power consumption.

So, anyone see a downside to running the subs always-on? Anyone else do this?
__________________
ULS-15 (4)
Reply With Quote
  #2  
Old July 17th, 2018, 2:34 PM
Kevin_Hsu Kevin_Hsu is offline
Administrator
 
Member Since: Jun 2012
Location: CA, USA
Posts: 264
Kevin_Hsu is on a distinguished road
There is no downside to running the sub always on. Feel free to do that. It's a very efficient amp such that it only pulls more watts if the sub is actually try to output bass material.
Reply With Quote
  #3  
Old July 17th, 2018, 3:10 PM
JerryMeeker's Avatar
JerryMeeker JerryMeeker is offline
Registered User
 
Member Since: Feb 2010
Posts: 131
JerryMeeker is on a distinguished road
Quote:
Originally Posted by Kevin_Hsu View Post
There is no downside to running the sub always on. Feel free to do that. It's a very efficient amp such that it only pulls more watts if the sub is actually try to output bass material.
Thanks for the quick response, Kevin. That is what I will do then. And you know I would never try to generate excessive bass material...
__________________
ULS-15 (4)
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump
 


All times are GMT -8. The time now is 11:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Forum Rules The Golden Rule: Treat others as you would want to be treated.

Technical Support: The best way to get tech support for serious issues is to call or email us. Questions asked on the forum may not be answered by qualified professionals.

No "Flaming": Spiteful talk and flaming wars will lead to "time-outs" for parties involved.

Shootouts: Shootouts are comparisons between products. We need to know about shootouts before allowing them on the forum, so call us and talk to the director of Sales before posting. Otherwise, your shootout may be removed.

Add to Reputation: Once you are a registered member, you can click this icon to add to the tally of other members' Rep Points. You must vote for seven other people before you can vote for the same person twice.

Report Bad Posts: Once you register, click this icon to let Administrators know if they should review a post. Please be specific as to why action might be needed.

HSU RESEARCH IS NOT RESPONSIBLE FOR COMMENTS MADE BY THIRD PARTY INDIVIDUALS ON THIS FORUM.

Thanks for reading the rules. Have a good time :)

In Association With