HSU Research Forum (HRF)  

Go Back   HSU Research Forum (HRF) > Hsu Central > Hsu Research - Speakers and Subwoofers
Forum Help Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old November 6th, 2009, 9:28 AM
95 Silver TA 95 Silver TA is offline
Registered User
 
Member Since: Feb 2005
Posts: 71
95 Silver TA is on a distinguished road
Questions about Sub-port placement?

Wanted to know what are the benefits and draw backs of having the ports on a sub like the VTF-MK3 too close or too far away from the wall.

Does the having the ports (facing the wall) too close (like 1-2 inches) disrupt air flow and cause port noise or cause bass to get too boomy?

Does having it too far (like 10 or more inches) reduce bass impact?

And what spacing is considered ideal?

What considered too far and too close?
Reply With Quote
  #2  
Old November 7th, 2009, 9:09 AM
mystik610 mystik610 is offline
Registered User
 
Member Since: Jul 2009
Posts: 46
mystik610 is on a distinguished road
Hsu recommends keeping the ports at least 4 inches away from the wall. In my experience, any closer than that and the sub will be prone to distortion.

Having the sub fire into the wall will give your sub additional boundary gain, so there are definitely perks to keeping it relatively close to a wall. This will yield you more SPL's without any additional effort from the sub. If you can keep the sub in a corner...even better!
__________________
Sub: Hsu VTF3-MK3
Front: Polk Audio LSi9 - Modded Crossovers
Center: Polk Audio LSi9 - Modded Crossovers
Rear: Polk Audio FXi3
Pre/Pro: Onkyo TX-SR805
Amp: Emotiva XPA-5
Reply With Quote
  #3  
Old November 7th, 2009, 9:23 AM
Bill Mitchell Bill Mitchell is offline
Registered User
 
Member Since: Sep 2009
Location: Austin, TX
Posts: 55
Bill Mitchell is on a distinguished road
I'm sure you've seen the posts by Pete Hsu that advise at least 4" from port to wall. Similar advice is in the Audyssey setup guide for receivers so equipped; they advise 4" to 5".

With corner placement, when I tried moving my sub port from 4" to 11" from the wall, Audyssey had to set the trim about 1.0dB higher. When I tried moving the sub even farther from the corner, the trim in the AVR was set 2.0-2.5dB higher. As a comparison, when I reconfigured the sub from MaxOutput to MaxExtension, Audyssey set the trim about 2.0dB higher for the same average sound level.

Of course, you already expected this. The farther you move the sub from the corner, the less the corner focuses the sound on the rest of the room, and the more power is needed from the amp for the same sound level.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump
 


All times are GMT -8. The time now is 3:51 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Forum Rules The Golden Rule: Treat others as you would want to be treated.

Technical Support: The best way to get tech support for serious issues is to call or email us. Questions asked on the forum may not be answered by qualified professionals.

No "Flaming": Spiteful talk and flaming wars will lead to "time-outs" for parties involved.

Shootouts: Shootouts are comparisons between products. We need to know about shootouts before allowing them on the forum, so call us and talk to the director of Sales before posting. Otherwise, your shootout may be removed.

Add to Reputation: Once you are a registered member, you can click this icon to add to the tally of other members' Rep Points. You must vote for seven other people before you can vote for the same person twice.

Report Bad Posts: Once you register, click this icon to let Administrators know if they should review a post. Please be specific as to why action might be needed.

HSU RESEARCH IS NOT RESPONSIBLE FOR COMMENTS MADE BY THIRD PARTY INDIVIDUALS ON THIS FORUM.

Thanks for reading the rules. Have a good time :)

In Association With